Sagging gate repair experts in the repair of any and all types of fences and gates, including any and all fence and gate repairs in Skye, and I am very happy to be able to offer my services to you. Do you reside in Skye and require a repair for your fence or gate? You have arrived at the appropriate location, whether the wind has blown over your fence or you just need some straightforward repairs done to the gate.

Fixing fence posts that are broken or rotten Sagging gate repair

If your fence is leaning to one side or another, this is almost certainly what has happened. The presence of moisture surrounding a fence post, which rots the base over time, is the most typical reason for a fractured fence post. As a result of the wood rotting, the post will become much more brittle. When it reaches a certain point, all it takes to bring the fence down is a powerful gust of wind.

Unstable Fence

If you are able to go up to your fence and move it more than one or two inches in either direction, then it is likely that a fence post has rotted away and is no longer holding the fence. This is virtually the same problem as a broken fence post; the only difference is that your fence hasn’t collapsed completely yet.

Broken Fence boards, palings, or rails may be utilized.

Another problem that you have to deal with Sagging gate repair experts frequently is this one. On the other hand, this is not particularly difficult, and it is highly likely that you will be able to finish this repair on your own. To install the new fence boards, you need only visit your neighbourhood Bunnings, purchase a few replacements and some nails or screws, and then attach them.

Sagging Gate

In order for gates to function to their full potential, they, like doors, require routine maintenance. However, there are times when they are constructed incorrectly from the beginning. In either case, sagging gates are an annoying problem which you don’t have to put up with if you don’t want to. The majority of the time, simply strengthening the gate by adding a cross member and a few screws is all that is required to rectify the situation.